Products - LED Arrow Module 300mm

LED Arrow Module 300mm

LED Flashing Modules produce minimum luminous intensity in appropriate manner and reduce power up to 8 watt. These products are designed in a way that can be installed easily on signal housings.LED flashing modules have 122 LEDs, one of them with duty of giving one -sided illumination and the other with duty of setting point of the light.LED flashing modules are moisture, dust and vibration resistant . They are UV stablized and can withstand ultraviolet exposure.

Product Specification

1. Product charactristics of LED flashing modules: 
LED Flashing Modules produce minimum luminous intensity in appropriate manner and reduce power up to 8 watt. These products are designed in a way that can be installed easily on signal housings. 
LED trafic modules have 122 LEDs, one of them with duty of giving one -sided illumination and the other with duty of setting point of the light. 
LED traffic modules are moisture, dust and vibration resistant . They are UV stablized and can withstand ultraviolet exposure. 
Electrical Specifications 
1. LED traffic modules have a control system that produce appropriate operation voltage. 
2. Operation Voltage 
• Operation voltage of LED traffic modules shall be ± 220 V and have the frequency of 50 Hz. 
3. Electrical isolation 
• The isolator surface of LED traffic modules can bear electrical voltage of 1000VAC. ( Isolator resistance is more than 30 MΩ.) 
4. The electric power of modules with voltage of 220 VAC and the frequency of 50 Hz: 
• Arrow light: 8 W 
• The switching board has the minimum electrical power of 25 W. 
5. Longevity 
• LED traffic signals life time is 100,000 hours. 
6. For green and red modules, appropriate time of measuring luminous intensity is 5 minute and for yellow modules is immediately after turning on. 
7. Wavelength of three-coloured LED traffic signals: 
colour wavelength 
1 Red 600-650 Nm 
2 Yellow 550-585 Nm 
3 Green 485-530 Nm 
8.The used LEDs are traffical LEDs and have luminous intensity of 3.0 candle. 
9. LED traffic modules’ circuits have surge protection quality and can withstand high and low frequency and surges. 
10. LED modules are designed in a way that its illumination changes in accordance with light of environment. This reduction is in the way that luminous intensity of all the LEDs reduce in the same quantity. 
11. This luminous intensity reduction is continous. The minimum luminous intensity in - 2.5° vertical angle and -2.5° horizontal angle is not below 30% of licensable minimum low voltage. 
12. The LED modules light don’t have any electro magnetic effect on environment. 
13. LEd modules in temperature of +30° C have 7% of power factor and nominal voltage. 
14. When there is no shell in the back of module, LED modules can work in the temperature of -25 to + 85° C. 
15. LEDs are placed in a way that burning one of LEDs doesn’t affect the luminous intensity and other LEDs operation.

Technical specification: 

1. LED flashing module LEDs are made of anti UV polycarbonte, moisture and dust resistant materials. 
2. The lenses’ colour endurance is 5 years and can work at temperature between -40° to +80° C. 
3. The lenses are transparent and without bleb. Their surface are reflective. 
4. The size of LED flashing lights are designed in a way that is installable on all signal bodies. 
5. The lens’ diameter is 300mm but only its 280 mm is visible. 
6. The LEd flashing module weight is 2.5 kg.  
7. Signal body is made of Anti UV polycarbonate materials. 
8. LED modules are ready to install and don’t need any adjusting. 
9. LED flashing module’s parts are designed in a way that it can resist mechanical vibration like wind and other external factors. 
10. Therewith you can see general view of traffic signals and its LED specification.