Products - Full LED Signal Heads 300mm

Full LED Signal Heads 300mm

LED Traffic Signals produce luminous intensity of 400 candle in appropriate manner and reduce power up to 8 watt. These products are designed in a way that can be installed easily on signal housings.LED trafic signals have 204 LEDs, one of them with duty of giving one -sided illumination and the other with duty of setting point of the light. 

Product Specification

1. Product charactristics of LED traffic signals: 
LED Traffic Signals produce luminous intensity of 400 candle in appropriate manner and reduce power up to 8 watt. These products are designed in a way that can be installed easily on signal housings. 
LED trafic signals have 204 LEDs, one of them with duty of giving one -sided illumination and the other with duty of setting point of the light. 
LED traffic signals are moisture, dust and vibration resistant . They are UV stablized and can withstand ultraviolet exposure. 
Electrical Specifications 
1. LED traffic signals have a control system that produce appropriate operation voltage. 
2. Operation Voltage 
• Operation voltage of LED traffic signals shall be ± 220 V and have the frequency of 50 Hz. 
3. Electrical isolation 
• The isolator surface of LED traffic signals can bear electrical voltage of 1000VAC. ( Isolator resistance is more than 30 MΩ.) 
4. The electric power of signals with voltage of 220 VAC and the frequency of 50 Hz: 
A. Yellow light: 8 W 
B. Green light: 8 W 
C. Red light: 8 W 
D. Arrow light: 8 W 
• The switching board has the minimum electrical power of 20 W. 
5. Longevity 
• LED traffic signals life time is 100,000 hours. 
6. Optical Specifications 
• The luminous intensity of 200mm diameter LED traffic signals in 25° C is 200 candle. 
7. For green and red signals, appropriate time of measuring luminous intensity is 5 minute and for yellow signals is immediately after turning on. 
• Luminous intensity of arrow signals is more than 400 m*m candle. 
8. Wavelength of three-coloured LED traffic signals: 
colour wavelength 
1 Red 600-650 Nm 
2 Yellow 550-585 Nm 
3 Green 485-530 Nm 
9. The used LEDs are traffical LEDs and have luminous intensity of 3,0 candle. 
10. LED traffic signals’ circuits have surge protection quality and can withstand high and low frequency and surges. 
11. LED signals are designed in a way that its illumination changes in accordance with light of environment. This reduction is in the way that luminous intensity of all the LEDs reduce in the same quantity. 
12. This luminous intensity reduction is continous. The minimum luminous intensity in - 2.5° vertical angle and -2.5° horizontal angle is not below 30% of licensable minimum low voltage. 
13. TheLED signals light don’t have any electro magnetic effect on environment. 
14. LEd signals in temperature of +30° C have 7% of power factor and nominal voltage. 
15. When there is no shell in the back of module, LED signals can work in the temperature of -20 to + 75° C. 
16. LEDs are placed in a way that burning one of LEDs doesn’t affect the luminous intensity and other LEDs operation. 

Technical specification: 
1. LED traffic module LEDs are made of anti UV polycarbonte, moisture and dust resistant materials. 
2. The lenses’ colour endurance is 5 years and can work at temperature between -40° to +80° C. 
3. The lenses are transparent and without bleb. Their surface are reflective. . 
4. The size of LED traffic lights are designed in a way that is installable on all signal bodies. 
5. The lens’ diameter is 300mm but only its 280 mm is visible. 
6. The LEd traffic module weight is 2.0  kg.  
7. Signal body is made of Anti UV polycarbonate materials. 
8. LED signals’ lenses are made of anti UV materials. 
9. LED signals are ready to install and don’t need any adjusting. 
10. LED traffic module’s parts are designed in a way that it can resist mechanical vibration like wind and other external factors. 
11. Therewith you can see general view of traffic signals and its LED specification.

Technical specification of LED traffic signal body: 
1. All the parts of Alton Ray Company’s traffic signal bodies are made of black-coloured polycarbonate materials. They are anti UV and moisture and dust resistant. They also can work in temerature between -30 to +85° C. 
It is important to know that LED traffic signal bodies are made of recyclable polymer materials and they are environment friendly. 
2. Traffic signal body specifications: 
• Melting point: 275° C. 
• Resistance to tensile: 59 kg/cm2 
• Glass transition temperature: 150° C 
• Relative elongation: 52.5% 
3. All the parts of traffic signal bodies are designed in a way that can be opened, closed and replaced easily. . 
4. All the traffic signal poles and its joints are designed in a way that can be adjusted to vertical axis. Its poles are very firm and they are replaceable. They will not deflect or bend easily. 
5. You can see production date, type of material and name of company on all the main parts of traffic signal ( like body and door ), you can determine the production date of products from this table. 
6. There is a special lens between door and body of traffic signal that make it water and dust resistant. 
7. LED traffic signal body has three seperate houses that connect together with three screw. There are signal poles in upper and lower part of traffic signal that help to install signal to the traffic signal pillar. It help to adjust appropriate visual angle and a cable that go through it. 
8. Each signal house size is 130*140*155. 
9. Lens is made of transparent polycarbonate materials. It has appropriate resistance to work in 
environment and its colour garranty is 5 years. 
10. Lights are medular and can install from one to four housed signal. 
11. Signal body poles are made of traffical polycarbonate materials. 
12. Traffic signals have one year garranty and its life time is 5 years.